Step-by-step instructions for replacing a fluorescent lamp. How to change a light bulb in chandeliers, suspended and suspended ceilings How to change fluorescent lamps

How to change a light bulb in a suspended ceiling?

To change a light bulb in a suspended ceiling, you don’t have to turn to professionals for help. You can do this yourself. Depending on the type of lamp installed, replacement instructions will vary.

Getting a regular incandescent lamp is not difficult, but before replacing other types of lamps, it is better to read the step-by-step instructions.

For what reasons are light bulbs replaced?

Stretch ceiling is a modern design solution that can decorate any interior. When choosing lighting there is a lot of room for imagination - from a chandelier, LED strip to spotlights of different sizes and shapes.

But sooner or later you have to change the light bulbs. Why is this happening?

• The lamp is out of order. This is the most common reason, so you shouldn’t skimp on buying a lamp. Then the replacement procedure will have to be carried out very rarely.
• Change of interior. This common reason, which requires the dismantling of old lamps. But it is not necessary to remove all the light bulbs. Sometimes the solution may be to buy covers for spotlights, which will give them an updated look. As for the chandelier, here you can remake each lampshade or purchase new ones.
• And another reason why lamp dismantling is inevitable is replacing the entire blade. It is impossible to replace a suspended ceiling with a new one without affecting the lamps.

If for any of these reasons it was decided to replace the lamp with another, then you should familiarize yourself in detail with the rules for dismantling each type of lamp. In this way, serious mistakes will be avoided.

Replacing a halogen lamp

This is one of the most popular lamp options, which is often used in spotlights. It has high power, hence the short service life. To replace it with a new one, you need to follow simple rules.

• First you need to turn off the electricity in the room.
• Before work, you should wear cotton gloves, because the body of the halogen emitter has a high temperature. Do not touch the surface of the light bulb without gloves.
• Only after this the fasteners are removed, the old lamp is unscrewed and replaced with a new one.
• The new model is fixed with fastenings.
• It should be taken into account that the body of the halogen lamp must be at a distance from the canvas of at least ten centimeters.

Replacing the LED lamp

Such lamps are convenient and profitable because they do not require a lot of electricity. This means they will last a long time.

But nothing lasts forever, so sooner or later this light bulb will have to be replaced with a new one. How to do it?

• First, you need to make sure that the electricity in the room is turned off.
• If you are replacing a light bulb in the evening, it is better to take a flashlight with you to make it easier to navigate.
• After this, you need to remove the fastenings of the old lamp.
• Then the insulation from the wiring is removed.
• Afterwards it is necessary to disconnect the wires.
• In order not to act “blindly”, it is better to read the instructions for the new lamp.
• Then directly insert the new LED lamp.
• Then you need to connect the necessary wiring and attach the cover with screws.

Despite the fact that LED lamps require periodic replacement, they are still more economical and are very popular among owners of suspended ceilings.

Replacing a spotlight

Working with this type of lighting device will require a little more skill.

• First you need to disassemble the box, disconnect the wiring and remove the old lamp.
• For a new lamp, you need to open the box and connect wires of the same color.
• Then, using special pliers, you need to crimp and close the wiring with a cap.
• When all the wiring is in the box under the cover, you can install the light bulbs.
• Then you need to fix the lamp in the ceiling spot. Its power should not exceed that indicated on the flask.
• After finishing work, you can turn on the voltage.

To properly remove the spotlight and screw in a new one, you need to take precautions.

• Turn off the electricity before replacing the lamp, otherwise there may be an electric shock.
• The lamp must be held by the springs, otherwise they will damage both your fingers and the ceiling.

By following these simple rules, you will be able to easily unscrew the spotlight.

Which dismantling is considered incorrect?

Some people mistakenly believe that replacing a light fixture requires cutting the fabric around it. But this option is not only wrong, but also dangerous. Why?

• Firstly, it will be almost impossible to restore the canvas after such a procedure.
• Secondly, if you touch the wrong wire, you can get a serious electric shock.
• The new lamp must be larger in diameter, because the installation location will increase due to the cut, and the old lamp size will not fit.
• If the product is under warranty, then after such intervention it will no longer be valid.

With such an impact, the entire stretch ceiling may be irreparably damaged and the only way out will be to replace it with a new one. Therefore, if you are unsure of your abilities, it is better not to take risks, but to seek help from professionals.

How to remove a chandelier from a stretch ceiling?

It happens that to replace a lamp it is necessary to remove the chandelier. You can do this yourself, following the recommendations.

• If the chandelier hangs on a hook, then after removing the protective cap you need to reach it with your hand and grab onto this fastener. After removing the chandelier from the hook, you need to work with the wiring, disconnecting them.

• If the chandelier has a cross-shaped strip, then its dismantling will be a little more difficult. First, the lamp must be freed from the shade, lamp and other decorations. Only after this the cap is unscrewed and the fastening system is disconnected (you just need to unscrew the screws). Then, by analogy, work with wires occurs.
• Experts advise not to purchase flat horizontal chandeliers for suspended ceilings, especially with incandescent and halogen lamps. Their heat can cause the fabric to melt.

When replacing a light bulb on a suspended ceiling, it is worth considering some more nuances.

• If the suspended ceiling has mirror elements, then you need to change the lamps carefully to avoid damaging the surface.
• It is better that the lamps are the same, otherwise the light supply will be uneven. In addition, uniformity always looks more aesthetically pleasing. If you cannot find the right lamp, it makes sense to replace everything.
• It is better to work with gloves. This way the lamp will have a long service life.
• Lamps with high power do not fit well with a suspended ceiling. It is not recommended to screw in a lamp with a power higher than 35 watts, otherwise there is a risk of damage to the material.
• For preventive purposes, you should not overheat the devices unnecessarily, since any equipment needs a break in operation.
• It is better not to skimp on quality lamps. They will last longer and will have to be replaced less often.

Thus, replacing a light bulb is not as difficult as it seems at first glance. The main thing is to strictly follow the recommendations, and everything will work out.

For information on how to change a light bulb in a suspended ceiling, see below.

How to change a light bulb if the old one is burned out? For everyone, this seems like an obvious and simple action, but if you replace the light bulb incorrectly, you can get bad consequences.

Everything is very simple at first glance, however, in order for the light bulb to last as long as possible, you need to follow several rules.

Which light bulbs require proper replacement:

• incandescent light bulb;
• halogen;
• replacing the LED light bulb;
• luminescent.

Replacing an incandescent light bulb

Before you begin the process of replacing the light bulb, make sure that there is no leakage at all. To do this, move the machine’s toggle switch to the “off” state in the distribution panel.

After you complete this action, be sure to check whether the apartment is actually de-energized, since sometimes distribution panels can be difficult to understand, and there are no marks there.

Tip: Before turning off the power, check to see if any appliances are turned on, as they may be damaged or even burnt out.

The power of lamps is measured in watts, and usually a lamp with a power of 100 watts is suitable for simple use.

How to change a light bulb correctly:

• to replace a light bulb, unscrew the old lamp counterclockwise;
• screw in the new lamp clockwise, but do not use much force when screwing in, because you can damage both the lamp and the luminaire;
• turn on the toggle switch in the distribution panel;
• turn on the switch of a regular switch.

If you change the lamp in a chandelier, you do not need to stand under it when you turn it on for the first time. Externally, the lamp may be in good working order, but in fact, sometimes there are defective lamps. When turned on for the first time, such devices may explode and injure you with shrapnel.

How to change a halogen or LED light bulb

In suspended ceilings, spot lighting is usually based on the use of halogen or LED lamps. To implement correct replacement such a lamp, while making sure it doesn’t hit you, you need to know some nuances.

First you need to unlock the light bulb in the lamp housing. To do this, carefully remove the special round-shaped ring. After the lock is removed, you can unscrew the lamp. Usually this is not difficult.

When replacing the light bulb, hold all parts with your hands, since the retaining ring has the appearance of a spring that can slip out of your hands.

If you previously had lamps yellow color, but there was not enough lighting in the room, you can buy a new lamp of the same color, but white. It will give more light, and the amount of energy will be spent the same as the yellow one.

If you are faced with the issue of adding more to your room, it is worth considering that you will need the same light bulbs as the ones you already have.

The thing is that different lamps have not only different features, but also appearance, therefore it is advisable to use lamps from one manufacturer in one room if we're talking about about spot lighting.

And the most important thing about halogen lamps is that they should not be touched with bare hands. All actions should be carried out only with gloves, because this will help protect the lamp from premature damage.

By the way, if you do touch the light bulb, don’t be upset, you can gently wipe it with a cotton swab with a little alcohol on it.

Replacing fluorescent lamps

When using this type of lamp, it is important that it is in order.

Replacing such a light bulb is not at all difficult; it is similar to the process that we described when replacing an incandescent lamp.

However, if such a lamp has burned out for the first time, you need to remember that when purchasing a new one, its power should either correspond to the old lamp, or be based on the following principles...

Firstly, fluorescent lamps give a greater glow with less power, so there is no point in looking for the most powerful one, because 50 W may well be enough for you to illuminate a large room.

Secondly, this particular type of lamp gives soft light and diffuses it well, so you definitely won’t need several lamps in one room.

However, it is worth understanding that if you decide to replace, for example, a conventional incandescent lamp with a fluorescent lamp, then the latter option will possibly blink and is also very sensitive to high temperatures. At the same time, little will affect the service life of such a lamp, and it often lasts 10-20 times longer than an incandescent lamp, of which, by the way, you may need several for one room. Create in your room and protect your eyesight!

Over the past ten or fifteen years, installation of lamps in suspended ceilings has found widespread use. These ceiling structures are attached to the suspended ceiling of the apartment. Such a halogen Euro bulb in a spot can be quickly connected or removed. This will be discussed in this article.

Suspended ceiling as a light source

Before installing the suspended ceiling, a frame is assembled from wooden blocks or metal profiles, which are directly mounted to the concrete or wooden ceiling premises. Then the ceiling covering itself is attached to the frame. The ceiling material for such a ceiling can be, for example, plasterboard. But such ceilings can also be suspended, in which the ceiling covering is made of strong synthetic material. These designs perfectly hide all defects in the main ceiling of the room and give it an even and smooth look.

Between these two ceilings (main and suspended), thanks to the assembled and fixed frame, a free space of up to 10 cm is formed. Electrical wiring for connecting future lighting and the main structural elements of the light source are hidden in this empty space. To connect lamps and various light sources, special holes are made in such a ceiling. A distinctive feature of this ceiling is the possibility of installing built-in lamps.

Very often, suspended ceilings are equipped with point light sources, which, of course, contain light bulbs. Anyone who assembled the structure of such a ceiling himself knows how to replace light bulbs. Those who had the installation done by the company may not have such knowledge; in this case, it is better to call a specialist or find the necessary information on replacement yourself and try to replace it.

In most cases, the main reason for replacement is its burnout. And the way to install another depends on what type of ceiling lighting you have - a regular chandelier or lamps.

If one of several bulbs in a pendant chandelier has burned out, do not immediately change it. In this option, it is more convenient and safer to wait until daylight and replace the burnt-out one in daylight. And if necessity forces you to start replacing in the dark, find an external light source, for example, a flashlight. You may need pliers and a screwdriver; it is better to wear gloves on your hands.

Before replacement, it is necessary to de-energize the light source being repaired by turning off the circuit breaker or wall switch.

The new light bulb should be on hand so that you can screw it in at any time.

When you turn on the lighting after replacement, never look at the light source or stand under it, because it is possible that the light bulb may be defective, and it may burst when turned on.

Type of lamps used in suspended ceilings

There are mainly four types of light bulbs used in suspended ceilings.

• Halogen. This type can be installed with the least amount of space between the false ceiling and the main one. Halogen bulbs can light up a room quite brightly and are a little more difficult to replace than a regular light bulb. Care must be taken when replacing. The operating time of this type of lamp largely depends on correct installation. In a household network, frequent voltage drops occur, which have a negative effect on the operation of the light source. For this, it is recommended to use voltage stabilizing devices.
• Regular incandescent lamps. Each of us has known these products since childhood, and changing them does not require much difficulty or knowledge. But ordinary lamps have one significant drawback: they heat up quickly and therefore are not suitable for all types of suspended ceilings.

• Fluorescent lamps. This type of lighting, even despite its high cost, has become widespread. They are very economical and consume the least amount of electricity, and their lighting characteristics are much higher than previous models. They have a number of negative qualities - products with a hot start light up slower than other analogues, have a limit on the number of switches on and off, and they contain mercury vapor, which further complicates the disposal process.
• LED bulbs. A more economical and long-lasting option for this type of ceiling. Their brightness sometimes exceeds the similar characteristics of luminescent products. The operating period of LED lamps reaches 72,000 hours of production, while a conventional lamp has only 1,000 hours.

When changing different lamps, it is necessary to take into account that they use two types of base. The first is with a regular right-hand thread and is used for a classic cartridge. Most of us know how to change a light bulb with this type. The second option is a G-shaped base with various types, the lamps are installed using the two pins provided. These pins perform a guiding function, and strong fastening occurs after a characteristic click.

Mounting methods

Three options are used for attaching various lighting sources, and the change is carried out different ways. Before replacing a burnt-out light bulb, you must turn off the power and prepare a secure base to stand on. This could be a stepladder or stool. Replacement should only be started when it has cooled down, otherwise there is a risk of burns.

1. The first mount is standard. This occurs by screwing the lamp into the socket. To replace it, you just need to unscrew it and screw the new one in until it stops.
2. Two-pin fastening- this type of fastening is typical for halogen lamps; they are held in place using two metal guides. To replace it, you need to unlock the lock - holding the lamp with one hand, while bending the retaining ring with the other. Then they take out the light bulb and insert a working one. After a characteristic click, the latch is secured. For this procedure, the suspended ceiling does not require disassembly; the supporting structure of the lamp is not removed from the hole.
3. Special cartridge. This mount predominates in fluorescent and LED lighting fixtures. When replacing, as in the previous version, remove the latch, take out the glass and unscrew the light source. This cartridge must be rotated ninety degrees when changing.

Replacing an incandescent lamp

Before replacing this type of lamp, first remove the shade or frame if necessary. Then, holding the socket, I unscrew the light bulb counterclockwise.

It is better to wrap the cracked lamp and remove it from the socket, while trying not to look at it to avoid getting splinters in your eyes. If the lighting fixture explodes, the remaining glass is also removed using any soft cloth, and the base is unscrewed with pliers. When screwing in a new light bulb, you don’t need to apply much force; it can break.

Replacing a fluorescent lamp

A fluorescent or energy-saving lamp, unlike an incandescent lamp, has a fluorescent tube. Changing such a light source is very simple; there is a choke next to the base, and with the help of this device it can be easily pulled out.

Replacing the LED lamp

When replacing a suspended ceiling light source, first turn off the power supply to the source by turning off the power supply. Then prepare any stable stand that you can stand on without the risk of falling, and you can conveniently change the light bulb. When replacing a lamp on a suspended ceiling, be extremely careful and careful, as this coating can easily be torn or cut.

To replace a lamp of this type, you must unlock the locking ring. Then take it out and select a working one with the same parameters. After replacement, insert the retaining ring into place and lock the lamp in the mount.

There are several tips when replacing a lamp in a suspended ceiling:

1. Provided that the design of your ceiling provides for the presence of yellow LED lamps, but such lighting is not enough for you, purchase standard white ones. The lighting level will immediately increase, but the amount of electricity consumed will remain at the same level.
2. To increase the service life of the lamp, do not handle it with bare hands; when replacing, it is better to use cloth gloves.
3. Always remember that stretch ceilings may not withstand the effects of too powerful a lamp. To prevent damage to the ceiling, use lamps with a power of no more than 35 W.
4. For the ideal effect of transmitting lighting to the ceiling in one room, use lighting fixtures of the same design. Thus, you will achieve not only the desired lighting, but also attractive appearance in the interior. And if, due to some circumstances, you cannot find the one you need, change them all.

And in order to similar situation did not happen again, you should always buy a few more of them.

The fluorescent lamp is very common due to its efficiency. The lifespan of such lamps is quite long, but still not infinite. You can learn how to easily and quickly replace a fluorescent fluorescent lamp, and what nuances need to be taken into account when replacing them, from this article.

Such lamps are most often used in ceiling lamps, to illuminate the work surface of kitchens, in bathrooms, as lighting in mirrors, etc. Lamps are available in various sizes and wattages.

In most cases, the reason for the lack of glow is the lamp itself, although sometimes the culprits are the inductor (ballast) or (if present) the starter. A burnt-out lamp can most often be identified by a dark-colored ring on the bulb near one end of the lamp.

Replacement procedure

2. Remove the lamp shade or grille to provide access to the lamp. Transparent shades of ceiling lamps can be attached to the lamp body with screws or latches. Inspect the lamp and unscrew the screws, or release the latches and remove the lampshade or reflective grille.

4. Buy a lamp of a size and power that matches the parameters of your lamp. If you cannot accurately determine the characteristics of a burnt-out lamp, take it with you to the store so that sales staff can select the correct replacement lamp.

5. Install a new lamp into the fixture. To do this, carefully insert both ends into the socket until it stops and carefully rotate the lamp around its axis 90 degrees (the direction of rotation is still not important). In some cases, you will feel a slight click as the lamp locks into position.

6. Turn on the lamp and check its functionality. If everything works fine, reinstall the lampshade or decorative grille. If the lamp does not light up, then turn off the lamp switch and try to carefully move or slightly rotate the lamp in the socket, or remove it and install it again.

If, after all attempts, the installed working lamp refuses to light, most likely the problem lies in a burnt-out inductor (replacing it is often comparable in cost to the cost of the lamp) or starter. All these parts are located inside the lamp body, and replacing them will require additional skills, especially replacing the choke.

If you do not have independent experience in performing such work, entrust it to a specialist or buy a new lamp if the cost of repair is equal to the cost of the lamp itself.

We should also talk about replacing a burnt-out fluorescent lamp in a tabletop office or home lamp. Such luminaires mainly use fluorescent lamps with sockets such as G23, GX23, 2G11, etc.

There may be some differences in the size and shape of the bases, but the principle of connecting the lamp to the lamp socket is the same for all. Thus, these instructions can be applied to all such lamps.

Replacement procedure

2. Place the lamp on the table and turn the shade up so that it is convenient for you to remove the lamp. Most often, the free end of the lamp is attached to the lampshade using a special plastic clamp.

In order to remove the light bulb from the socket, first gently pull it by the edge of the bulb in the direction from the lampshade, as if bending it, thereby removing it from the retaining bracket. If this bracket is already broken off (a fairly common occurrence), then skip this point.

Take the lamp with your hand (grab it with your fingers) by the bulb and simply pull it, shaking it slightly, in the direction from the socket hidden in the lamp body. The lamp should, with slight resistance, jump out of the socket.

3. Buy a new lamp. If you cannot unambiguously determine the size of the lamp and the type of base, then take the burnt-out fluorescent lamp with you to the store or market when you go to look for a replacement. This way, the seller can easily select the new lamp you need.

4. Install the lamp in the lamp. Once you have mastered the procedure for removing the lamp, it will not be difficult for you to do the reverse. Insert the new light bulb with the base into the socket and press the end of the bulb, pushing the light bulb into the socket. It should go into the cartridge all the way with a barely noticeable click.

Be careful when inserting the bulb back into the plastic retainer. Over time, the plastic of the retainer becomes extremely brittle and can break easily. At the same time, do not be too upset if this happens - this will not affect the operation of the lamp in any way.

IMPORTANT: A fluorescent lamp contains 3 to 5 mg of mercury, a very toxic metal. You should absolutely not throw away used lamps with household or construction waste. As a result of damage to the bulb of such a lamp, mercury will enter the environment. Please ensure safe disposal of the fluorescent lamp.

By clicking on the image below, you can watch a short video on how to replace a fluorescent fluorescent lamp. The video will open in a separate window.

Press the ↓↓↓ button and share with your friends if you find this article useful!

Bulbs for suspended ceilings are often used in spotlights. Some do the installation of the structure themselves and then have an idea of ​​how to change a halogen light bulb in a suspended ceiling and any others. This is not important. But if you ordered the installation of a ceiling from a company and did not do it yourself, then you may not know how the replacement is done.

On our website you can see photos and videos of installation various designs in suspension systems. Below will be given step-by-step instruction to do this job.

Products used

There are four types of light bulbs most often used in suspended ceilings.

How to unscrew, screw in, insert halogen spot products with your own hands

• Halogen, which can be installed with a minimum ceiling gap in relation to the base. They produce quite bright lighting. Replacing such an element is a little more difficult than an incandescent lamp and you must be extremely careful. The service life of such a lamp greatly depends on correct installation. We experience frequent changes in lighting supply, which negatively affect the operation of incandescent appliances. Therefore, it is better to use voltage stabilizers on the branch;

• Some use lamps with traditional incandescent lamps. These elements are well known to everyone and replacing them is not difficult. However, they are not suitable for all suspended ceilings, as they get very hot;

Luminescent

• Fluorescent lamps, despite the fact that their price is quite high, they are very popular because they consume little electrical energy. Moreover, their luminosity is much higher than that of their analogues. Disadvantages include slow start-up (hot-start lamps). And also a limited number of on-off cycles, as well as the content of mercury vapor in them, which complicates disposal.

LED luminaires for suspended ceilings

• for suspended ceilings the most economical and durable. The luminosity of such devices is often higher than that of fluorescent ones. Their service life can reach 72,000 hours, which is incredibly long. In comparison, a regular incandescent lamp has a lifespan of 1000 hours.

When replacing lighting fixtures, you should know a few nuances.

Two types of base are used mainly for spot lighting:

1. With traditional right-hand thread. It is used for a standard cartridge. And everyone knows how to make such a replacement;

1. There are lamps that are attached with two pins(base G with all sorts of modifications). They serve as guides and are fixed after a characteristic click. When replacing, do not press with force. If you get into the groove, then snapping will happen easily. Therefore, do not try to press, just pull it out and try again, perhaps the element did not fit into the groove;

Let's get started with replacement

Turn off the power

First you need to turn off the power supply to the branch. Don't forget about safety precautions. To do this, just make sure that the switch is in the “off” position.

After this, we find a comfortable support so that we can perform work at height. Use a stepladder or regular stool.

Advice! When working on suspension and tension systems, you should be extremely careful. If it is a suspended ceiling, then the fabric can be easily damaged. If the suspended rack system, and even with a mirror coating, then any careless movement can cause harm.

• If there is an incandescent lamp in the ceiling, then you need to grab the bulb and turn it counterclockwise, that is, it is held by the base.
• LED, halogen and fluorescent lamps have different mounts.

• When removing, first of all you should unlock the light bulb in the housing. There is a locking ring for this purpose. When doing this work, hold this part; the ring itself is springy and can easily slip out of your hand.
• For other designs, the ring is threaded and unscrews in a counterclockwise direction.

How to unscrew, screw in, insert a lamp correctly

• The lamp is now free. It won't fall because it's hanging on the wires. Pull it out and disconnect the connection by simply pulling it to the sides.
• Having taken out the lamp, you can see its rating and select a replacement.
• Install the lamp in the reverse order.

To ensure that the lamp not only works for a long time, but also looks beautiful in the ceiling, it is enough to follow a few simple rules:

• If you didn't have enough lighting in the room. Then you can use two methods to correct the situation. The first is to choose a lamp of higher power, and the second is to replace it with a more energy-efficient option - LED.

• If you were simply uncomfortable working, then try taking a daylight lamp with a temperature of 4000K. This type of lighting is more conducive to the work environment.
• Use the same model for suspended ceiling lamps, otherwise they won’t look very good together. If this is not on sale, then it is better to replace all the lamps in the room, unless of course this is too expensive.
• If you place a halogen lamp without a reflector, for example, in a chandelier, then remember that you cannot handle it with your bare hands. The fact is that their bulb is covered with a special coating, which degrades upon contact with fats - such a lamp will not last long. Use the cloth or cellophane included in the kit.

How to remove, disassemble, unscrew a built-in lamp

Now you know how to replace light bulbs for a suspended ceiling. The matter is simple, but not without certain subtleties. Let your home be bright and cozy.